Finally: Something To Build Upon

Trailer Floor

Having assembled the belly pan on the trailer frame, we put the floor joists together, put in insulation, and then put the plywood on top.  The insulation was 3" think foam.  The floor of the trailer consist of the following:

1. Galvanized steel belly pan
2. Plastic moisture barrier
3. Floor joists (2" x 3"s)
4. Insulation
5. 3/4" Plywood

You can see the various "layers" of the floor in this shot.

Here's the new fully assembled floor.

Flush anchors bolted through the joists, plywood, and trailer frame.

Mapping It Out


Here's the floor, with approximate location of major furnishings mapped out in blue tape.




Comments